Blue 1/2" LED Rope Lights with 8 Lighting Modes Controller, IP65, Linkable
Description
- 8 DIFFERENT MODES: Combination, Waves, Sequential, Slow-Glow, Chasing Flash, Slow Fade, Twinkle Flash, Steady On
- DURABLE: 1/2" crystal clear PVC thermoplastic tubing is highly rugged and flexible for indoor and outdoor use.
- IP65*: Waterproof, protected from the intrusion of water, outdoor moisture, and water from all directions.
- SAFETY: Built-in fuse connector provides an extra layer of protection from shortages. Rope Light remains continuously cool to the touch during operation, safe for kids and pets.
- EXTEND: End to end connection. Easily connect rope lights together to extend the length. Each rope comes with a male and female end which can join together, with a maximum length of 150 feet.
Specification:
- Power Lead cable: 57" in
- Dimensions: 10'L x 0.5"W x 0.5"H
- LED spacing: 1" in
- Material: PVC Thermoplastic
- Connection: 2 Wire
- Electrical rating: 110V-127V AC, 50/60HZ, 2A
- Connectable: End to end connections (Up to 150 foot)
- Fuse Box Plug
- Power Plug each comes with built-in fuse bracket to secure an added point of safety
- Fuse Box Plug
- SafeGuard
What's Included: - (1) Rope Light Strand
- (1) 57" in Power Cord with built-in fuse protection
- (1) Fuse
- Controller Box with Button to Change Modes:
Controller Modes:
- Combination
- Waves
- Sequential
- Slow-Glow
- Chasing Flash
- Slow Fade
- Twinkle Flash
- Steady On
PRODUCT INFORMATION
IP65 rating rope light portion allows the lights to be protected from the intrusion of water, outdoor moisture, and water from all directions. Designed for bathrooms and other environments where water spray is a risk. These lights cannot be submerged.
PRE-assembled and workable straight out of the box, ready to use! Controller and endcap are removable allowing addition sections to be added onto the rope. It can extend up to 150ft per controller.
Each LED bulb is separated every 1". The ends of the rope have the female connector and the beginning of the rope where the controller is attached has the male connector. The male end should be unscrewed to connect into the female end for the side you wish to add.
Tab title
- 8 DIFFERENT MODES: Combination, Waves, Sequential, Slow-Glow, Chasing Flash, Slow Fade, Twinkle Flash, Steady On
- DURABLE: 1/2" crystal clear PVC thermoplastic tubing is highly rugged and flexible for indoor and outdoor use.
- IP65*: Waterproof, protected from the intrusion of water, outdoor moisture, and water from all directions.
- SAFETY: Built-in fuse connector provides an extra layer of protection from shortages. Rope Light remains continuously cool to the touch during operation, safe for kids and pets.
- EXTEND: End to end connection. Easily connect rope lights together to extend the length. Each rope comes with a male and female end which can join together, with a maximum length of 150 feet.
Specification:
- Power Lead cable: 57" in
- Dimensions: 10'L x 0.5"W x 0.5"H
- LED spacing: 1" in
- Material: PVC Thermoplastic
- Connection: 2 Wire
- Electrical rating: 110V-127V AC, 50/60HZ, 2A
- Connectable: End to end connections (Up to 150 foot)
- Fuse Box Plug
- Power Plug each comes with built-in fuse bracket to secure an added point of safety
- Fuse Box Plug
- SafeGuard
What's Included: - (1) Rope Light Strand
- (1) 57" in Power Cord with built-in fuse protection
- (1) Fuse
- Controller Box with Button to Change Modes:
Controller Modes:
- Combination
- Waves
- Sequential
- Slow-Glow
- Chasing Flash
- Slow Fade
- Twinkle Flash
- Steady On
PRODUCT INFORMATION
IP65 rating rope light portion allows the lights to be protected from the intrusion of water, outdoor moisture, and water from all directions. Designed for bathrooms and other environments where water spray is a risk. These lights cannot be submerged.
PRE-assembled and workable straight out of the box, ready to use! Controller and endcap are removable allowing addition sections to be added onto the rope. It can extend up to 150ft per controller.
Each LED bulb is separated every 1". The ends of the rope have the female connector and the beginning of the rope where the controller is attached has the male connector. The male end should be unscrewed to connect into the female end for the side you wish to add.